Details
• The burner is set to produce the proper amount of temperature rise for 3.6 GPM
• Decreasing the pressure changes the GPM to the point where you have to compensate by:
1.
Increasing the nozzle size in order to increase the GPM
2.
Decrease the thermostat setting because the burner is heating less water
Contact Easy Kleen for kit to adjust pressure 1-800-315-5533 ext.1, Kevin Reid
• If these adjustments are not made, this may produce steam
• Steam is Dangerous
• The high pressure hose, trigger gun, nozzles, filters, valves, o-rings, and brass fittings are not rated
for steam and may fail causing serious injury or death.
To Next Page
Loading...
