Installation
Now tap this number.
The app connects to the app controller.
To start the teach-in process, tap “Start teach-in”.
Now follow the on-screen instructions. Tap “Confirm
teach-in” to complete the teach-in process. You can
now control the easydriver with your smartphone/
tablet.
2.3.2 Code lock
There is an option to lock the app with a customised
code so it cannot be used by unauthorised persons.
Go to “setups/Menu”. On iOS devices, the code lock
will be the same as your device passcode (or Touch
ID). On Android devices, there is an option to set a cus-
tomised code under “Change code lock”.
GB4
English
To Next Page
Loading...