www.easystand.com 800•342•8968
For more detailed information refer to your owner’s manual.
Printed in the USA. © 2013 Altimate Medical, Inc. FORM BPFGSU 0213
™
Bantam-Supine Option
Step 1: Loosen both red supine
locking handles located by the hip
pivot on both sides of the unit. Flip
the supine lever located under the
right side of the seat down
to the
“supine” position. This will release the
back, seat and foot plates from the
frame.
Step 2: Adjust to the desired supine
position by tilting the back and then
tighten both red supine locking
handles. This can be done with the
user in the stander and at any position.
Step 3: Depress the foot pedal (or
optional hydraulic actuator) to
position the stander at the desired
standing angle.
Activating Supine Positioning
Supine
Locking
Handle
Step 1: Flip the supine lever located
under the right side of the seat up
to
the “sit to stand” position.
Returning to sit-to-stand position/deactivating the Supine Positioning
Step 2: Loosen the red supine
locking handles located by the hip
pivot on both sides of the unit and
push the back forward to connect
the back, seat and foot plate to the
frame. You should hear the supine
lever click into place. This can be
done with the user in the stander
and at any position.
To Previous Page
Loading...
