easyteck M300 - Page 24

24
phone is set to silent or turned o, the alarm function is still available.
Set the alarm
- Path of operation: Main Menu> Organizer > Alarm.
- The phone supports multiple alarm settings, use the up and down navigation keys you want
to set the alarm, press the [key] to enter the alarm edit page.
- Use the up and down navigation keys to turn input alarm parameters, select “Save” and
conrm to turn on the alarm.
- Click on the “left soft key” to open or close the selected alarm.
- When the alarm clock to remind, click the “snooze” after three minutes snooze alarm
Recorder
Recorder (T card is required)
- Path of operation: Main menu> Organizer > Recorder.
- If you need to turn on the recorder, the recorder interface press the [OK key] to open the
recording function.
- The state of being recorded, press the [Left key] to pause recording; press the right soft key
to stop recording.
- After the recording is nished, return to recording standby interface.