Eaton 5115 - Service and Support

SPECIFICATIONS
Eaton 5115 Rack-Mount UPS (500–1500 VA) User's Guide S 164201449 Rev B www.eaton.com/powerquality
55
Table 7. Battery
Configuration 500 VA: (2) 6V, 9 Ah internal batteries
500 VA: (2) 6V, 9 Ah internal batteries
1000 VA: (4) 6V, 9 Ah internal batteries
1500 VA: (6) 6V, 9 Ah internal batteries
Voltage 500 VA: 12 Vdc
750–1000 VA: 24 Vdc
1500 VA: 36 Vdc
Type Sealed, maintenance‐free, valve‐regulated, lead‐acid
Charging Advanced charging for faster recovery; approximately 3 hours to 90% usable capacity
at nominal line and no supplementary power supply load
Monitoring Advanced monitoring for earlier failure detection and warning
Battery Runtimes 5 minutes, typical at full load
NOTE Battery times are approximate and may vary depending on the load configuration and battery charge.