Eaton 5125 - Installation; Connecting Internal Battery Connectors

INSTALLATION
Eaton 5125 Tower UPS (1000–2200 VA) User's Guide S 05147304 Rev C www.eaton.com/powerquality
21
NOTE A small amount of arcing may occur when connecting the batteries. This is normal
and does not damage the unit or present any safety concern.
5. Connect the internal battery connector(s) (see Figure 5).
1000 VA 1500 VA 2200 VA
Figure 5. Connecting the Internal Battery Connector(s)
6. Replace the metal battery cover.
7. Replace the UPS front cover.
8. Continue to the following section, “Installing the UPS.”