Eaton 5125 - UPS Maintenance; Battery Removal Procedures (1000 VA)

UPS MAINTENANCE
Eaton 5125 Tower UPS (1000–2200 VA) User's Guide S 05147304 Rev C www.eaton.com/powerquality
44
3. 1000 VA models. Disconnect the red battery cable on the front of
the battery (see Figure 25). Pull the battery out onto a flat, stable
surface.
Disconnect the black battery cable on the rear of the battery, then
on the front of the battery. Disconnect the red battery cable on the
rear of the battery.
See “Recycling the Used Battery or UPS” on page 47 for proper
disposal.
Black Battery Cable
Red Battery Cable
Figure 25. Battery Removal (1000 VA Models)