5. Maintenance
5.2 Battery-module replacement
Safety recommendations
The battery can cause electrocution and high short-circuit currents. The following safety precautions
are required before servicing the battery components:
remove watches, rings, bracelets and all other metal objects from the hands and arms, p
use tools with an insulated handle. p
Battery-tray removal
A - Remove the middle part.
B - Remove the left-hand side of the front
panel by pushing the button and then
by sliding the part.
C - Disconnect the battery block by
separating the two connectors
(never pull on the wires).
D - Remove the metal protection cover
in front of the battery (two screws).
E - Pull the plastic tab to remove
the battery block and replace it.
To Next Page
Loading...
