2. Presentation
(1) USB communication port
(2) RS232 communication port
(3) Connector for automatic recognition
of optional battery modules
(4) Slot for optional communication card
(5) Connector for ROO (remote ON/OFF)
or RPO (Remote Power Off) control
(6) Connector for optional battery
modules
(7) 16 A outlet for connection of
equipment (Primary group)
(8) Two groups of 2 programmable
outlets for connection of equipment
(Group 1 and 2)
(9) Groups of 4 outlets for connection of
equipment (Primary group)
(10) Socket for connection to AC-power
source
2.2 Rear Panels
5PX 1500i / 2000i
5PX 2200i
5PX 3000i
5PX EBM (optional battery module)
(12) Connectors for battery modules
(to the UPS or to the other battery
modules)
(13) Connectors for automatic recognition
of battery modules
To Next Page
Loading...
