9000X AF Drives User Manual
MN04001004E
For more information visit:
www.eaton.com
1-1
June 2009
Chapter 1 — Overview
This chapter describes the purpose and contents of this manual, the receiving inspection
recommendations and the Cutler-Hammer
®
SVX9000/SPX9000 catalog numbering system.
How to Use This Manual
The purpose of this manual is to provide you with information necessary to install, set and
customize parameters, start up, troubleshoot and maintain the Cutler-Hammer SVX9000/
SPX9000 AF Drives by Eaton’s electrical business. To provide for safe installation and
operation of the equipment, read the safety guidelines at the beginning of this manual and
follow the procedures outlined in the following chapters before connecting power to the
SVX9000/SPX9000. Keep this user manual handy and distribute to all users, technicians and
maintenance personnel for reference along with the appropriate application manual.
Chapter 1 – Overview
is the chapter you are reading now.
Chapter 2 – Mounting
Chapter 3 – Power Wiring
Chapter 4 – Control Wiring
Chapter 5 – Menu Information
Chapter 6 – Start-Up
Appendix A – Technical Data
Appendix B – Fault and Warning Codes
Appendix C – Troubleshooting Charts
Appendix D – Spare Parts
Receiving and Inspection
This SVX9000/SPX9000 AC drive has met a stringent series of factory quality requirements
before shipment. It is possible that packaging or equipment damage may have occurred
during shipment. After receiving your SVX9000/SPX9000 drive, please check for the
following:
●
Check to make sure that the package(s) includes the proper drive, the User Manual, and
rubber conduit covers, screws, conduit plate and ground straps.
●
Inspect the unit to ensure it was not damaged during shipment.
●
Make sure that the part number indicated on the nameplate corresponds with the
Catalog Number on your order.
If shipping damage has occurred, please contact and file a claim with the carrier involved
immediately.
If the delivery does not correspond to your order, please contact your Eaton representative.
Note:
Do not destroy the packing. The template printed on the protective cardboard can be
used for marking the mounting points of the SVX9000/SPX9000 AF Drives on the wall
or cabinet.
To Next Page
Loading...
