Eaton 9140 - Page 51

INSTALLATION
Eaton
®
9140 (9910-E82/E83) UPS Installation Guide for IBM
®
Applications S 164201715 Rev 2
www.eaton.com/ibm
35
NOTE The redundant power source must be protected with Transient Voltage Surge
Suppression (TVSS).
2. Plug the UPS input power cord into a power outlet (see Table 7).
Table 7. Plug Types Supported
UPS Model
UPS Plug
Type
Inline
Connector
UPS
Receptacle
Power Outlet Type
E82 360P6W 360C6W 360R6W IEC60309 60A 2P+G
E83 363P6W 363C6W 363R6W IEC60309 63A P+N+G
The indicator flashes, indicating the UPS is in Standby mode
with the equipment offline. The fans run and the LCD illuminates
and displays the UPS startup screens.