Eaton 9140 - Serial (TTY) Interface Overview

COMMUNICATION
Eaton
®
9140 (9910-E82/E83) UPS Installation Guide for IBM
®
Applications S 164201715 Rev 2
www.eaton.com/ibm
61
Serial (TTY) Interface Overview
To serially (TTY) connect the UPS to a p5, pSeries, RS/6000
®
,
OpenPower or other system you need:
S An Eaton-supplied serial interface cable (labeled 124102042-002 or
116750226-001), located in the E82/E83 accessory kit
S LanSafe Power Management Software from the Software Suite CD,
located in the E82/E83 accessory kit
For p5 installations, you also need:
S An IBM-supplied 2-port Asynchronous EIA adapter (FC 5723) installed
on a p5 server (the pSeries does not require an EIA adapter)
S An IBM-supplied maintenance package 5200-05 for AIX 5.2L V5.2
(APAR IY66260); or the maintenance package 5300-01 for AIX 5.3L
V5.3 (APAR IY62267)
Follow the software installation instructions contained on the Software
Suite CD to install the LanSafe software. Connect the serial cable as
shown in Figure 38.