ULTRACAPACITOR MODULE INSTALLATION
Eaton 9355-F47 Unirom UPS (10/15 kVA) User's Guide S 164201642 Rev C www.eaton.com/powerquality
51
4. The internal cover panel is made up of two parts joined together
with four screws. Remove both parts of the panel at the same time
by removing the 10 M4 screws around the edges of the panel and
the single M4 screw in the middle of the panel (see Figure 26).
M4 Screws
Figure 26. Removing the Internal Cover Panel
To Next Page
Loading...
