Eaton 9355-F47 Unirom - Page 58

ULTRACAPACITOR MODULE INSTALLATION
Eaton 9355-F47 Unirom UPS (10/15 kVA) User's Guide S 164201642 Rev C www.eaton.com/powerquality
52
5. Install the ultracapacitor module as shown in Figure 27. Ensure the
unit is firmly seated against the stops at the rear of the cabinet.
Verify that the holes on the mounting frame line up with the holes
in the cabinet rails.
6. Secure the ultracapacitor module to the frame, using 2 screws and
washers. See Figure 27.
Red Connector
Black
Connector
Hold Down Screw
and Washer
Hold Down Screw
and Washer
Upper Shelf
with Bushing
Figure 27. Ultracapacitor Module Installed in Cabinet