COMMUNICATION
Eaton 9355-F47 Unirom UPS (10/15 kVA) User's Guide S 164201642 Rev C www.eaton.com/powerquality
61
S Industrial Relay Card - is used to indicate the operating status of the
UPS using the customer's monitoring equipment and to connect an
optional RMP. The IRC uses four isolated normally-open or
normally-closed dry relay contacts to indicate the UPS status. Normal,
Bypass, Battery, and Alarm mode can be monitored (see page 66 for
more information).
S Power Xpert Gateway UPS Card - has SNMP and HTTP capabilities as
well as monitoring through a Web browser interface; connects to a
twisted-pair Ethernet (10/100BaseT) network. It is compatible with
Eaton IPM/IPP software, Power Xpert monitoring software, and also
provides ModBus TCP connectivity to allow setup of UPS shutdown
schedules, as well as UPS test and control. In addition, you can attach
an Environmental Monitoring Probe to obtain humidity, temperature,
smoke alarm, and security information.
See Figure 28 on page 55 for the location of the two X-Slot
communication bays.
Relay Interface Card
Power Xpert Gateway UPS Card
Modbus Card
Industrial Relay Card
Power Xpert Gate
way
PXGX UPS
EMP Upstream Downstream
100100 Act Act Setup
Restart
Status
DHCP
Ident
Power
Figure 34. Optional X-Slot Cards
To Next Page
Loading...
