Eaton 9355 - Page 22

UPS Setup
14 Eaton 9355 UPS (20/30kVA) Installation and Operation Manual 164201626—Rev F www.eaton.com/powerquality
4. Remove the front door to access the front shipping bracket (see page 10).
5. Remove the four M8 screws securing the front shipping bracket to the cabinet (see Figure 6).
6. Remove the two M10 bolts securing the front shipping bracket to the pallet and remove the bracket.
Figure 6. Removing the Front Shipping Bracket (UPS Shown)
M8 Screws
M10 Bolts