Eaton 93PM-50-1 - Figure 46. Parts of the LCD

Eaton 93PM Emergency Lighting UPS (50 kW, 480V Three and Four-Wire UL 924) Installation and Operation Manual P-164000569—Rev 03 71
Figure 46. Parts of the LCD
A
B
C
D
A Status Bar displays the UPS name, UPS state, current date and time, meter information, active alarms and
notices, and a sign in/sign out button. For more information about alarms and notices, see paragraph
7.2.2 System Events.
B Main Menu Navigation Bar displays main menu functions and selections as tab buttons. To select a screen
function touch the tab name.
C Secondary Menu Navigation Bar displays functions and selections related to the current screen as tab
buttons. To select a screen function touch the tab name.
D Information Area contains status data, operational controls, acknowledgments, action confirmations, and
screen prompts.
You can use the LCD touch screen to:
• Look at a log of UPS events (alarms, notices, and commands) (see paragraph
7.2.6 Display Menu Operation)
• Monitor UPS operation (see paragraph 7.2.6 Display Menu Operation)
• Set UPS parameters (see paragraph 7.2.6 Display Menu Operation)
• Control UPS operation (see paragraphs 7.2.6 Display Menu Operation and 7.2.8 System Controls)
77..22..44 UUssiinngg tthhee MMeennuu
The UPS navigation tab menu bar allows you to display data in the information area to help you monitor and
control UPS operation. Table 15 shows the basic menu structure.
Table 15. Display Function Menu Map
Menu Option Description
HOME Displays the system status both graphically (mimic) and written.
METERS Displays performance meters for the system or critical load.
CONTROLS Displays the Controls screen.
UPS Operating Instructions