UPS MAINTENANCE
Eaton 9910 UPS and EBM User's Guide S P-164000005 Rev 2
45
6. Close the metal battery cover [1], then slide the cover slightly to the
right and then to the left [2]. Tighten the thumbscrew [3]. Torque
the screw to 0.7 Nm (6.2 lb in) if using a torque wrench.
Figure 10. Closing the Battery Cover
7. To attach the UPS front cover, press the two side latches toward
each other, align the cover with the UPS, and snap it into place.
To Next Page
Loading...
