UPS MAINTENANCE
Eaton 9910 UPS and EBM User's Guide S P-164000005 Rev 2
47
2. Disconnect both internal battery connectors, unclip the connectors
from the studs, and move the connectors out of the way.
Figure 12. Disconnecting the Internal Battery Connectors
3. Loosen the thumbscrew [1] on the battery retaining bracket, slide
the bracket to the left [2], rotate the bracket out [3], then slide the
bracket to the right and remove it [4].
Figure 13. Removing the Battery Retaining Bracket
To Next Page
Loading...
