Eaton 9910 - Weights, Dimensions, and Electrical Specs

SPECIFICATIONS
Eaton 9910 UPS and EBM User's Guide S P-164000005 Rev 2
54
Table 10. Weights and Dimensions (3000 VA Models)
UPS EBM
Dimensions without
cover (WxDxH)
483 x 528 x 127 mm
19” x 20.8” x 5.0” (3U)
483 x 508 x 127 mm
19” x 20.0” x 5.0” (3U)
Weights 40.9 kg (90.2 lb) total weight
21.3 kg (47 lb) internal battery only
19.6 kg (43.2 lb) cabinet only
52.2 kg (115.1 lb)
Handling Requirement Two persons Three persons
Table 11. Weights and Dimensions (6000 VA Models)
UPS EBM
Dimensions without
cover (WxDxH)
483 x 735 x 171.5 mm
19” x 28.9” x 6.8” (4U)
483 x 703.6 x 127 mm
19” x 27.7” x 5.0” (3U)
Weights 72 kg (159 lb) total weight
24 kg (53 lb) internal battery each of two
24 kg (53 lb) cabinet only
59 kg (130 lb)
Handling Requirement Cabinet only: Two persons
Single battery only: Two persons
Specially trained persons, a lifting device,
or both
Table 12. Electrical Input and Output
9910-E35 9910-E36 9910-E66 9910-E67
Nominal Output Voltage
(user selectable)
200V / 208V 220V / 230V / 240V 200V / 208V
220V / 230V / 240V
200V / 208V
220V / 230V / 240V
Nominal Input Voltage 208V 230V 208V / 230V
auto sensing
208V / 230V
auto sensing
Input Voltage Range 155–255 Vac 160–286 Vac 155–255 Vac 160–286 Vac
Maximum Input Current 16A 16A 200V: 30A
208V: 24A
30A
Input Frequency 50/60 Hz ±3% auto sensing
Efficiency (with fully
charged battery)
>95% Normal mode