14 Eaton 9PX Lithium-Ion User Guide P-164001006—Rev 02
Figure 4. 9PXEBM48RT1U-L / 9PXEBM72RT1U-L
• If you ordered an optional Extended Battery Module (EBM), verify that the following additional items are
included with the EBM:
4
2
1
1
Battery power cable with attached battery
detection cable
2
Stabilizer bracket (4 screws included)
3
Rack kit for 19-inch enclosures (optional)
4
EBM Installation manual.
3
NOTE 1 Discard the EBM user’s guide if you are installing the EBM with a new UPS at the same
time.
NOTE 2 Use the UPS user’s guide to install both the UPS and the EBM.
Remember If you ordered other UPS accessories, refer to specific user manuals to check the packing
contents.
33..33 TTooww ee rr IInnssttaallllaattiioonn
Tip If you ordered other UPS accessories, refer to specific user manuals to check the tower installation with
the UPS.
To install the cabinet:
1. Place the UPS on a flat, stable surface in its final location.
2. Always keep 6" or 150 mm of free space behind the UPS rear panel for ventilation.
3. If installing additional cabinets, place them next to the UPS in their final location.
Tower Installation
To Next Page
Loading...
