10 4–20kVA Users Guide P-164000669 4–20kVA Users Guide P-164000669—Rev 09
1. Move the UPS shipping pallet close to the desired location.
2. If installed, remove the straps and bracket bolts that attach the UPS to the pallet (see Figure 7 ) .
3. If you are rack-mounting the UPS, proceed to “ 2.6 Rack-Mount Installation” .
Figure 7. UPS on Shipping Pallet
Caster Cart
Leveling Feet
(4)
Bracket Bolts
(8)
4. Attach the supplied ramp to the pallet with the two brackets and four wood screws provided. ( See
Figure 8).
5. Retract the leveling feet by turning them clockwise then carefully roll the cabinet down the ramp to its
intended operating location ( See Figure 8) .
UPS Setup
To Next Page
Loading...
