Eaton 9PXM - Figure 66. On;Off Settings Menu

84 4–20kVA Users Guide P-164000669 4–20kVA Users Guide P-164000669—Rev 09
On/Off Settings
The On/Off Settings Menu enables/disables selected automatic restart and shutdown functions.
Figure 66. On/Off Settings Menu
Forced reboot
Disabled √
Enabled
Local Settings
In/Out settings
On/Off settings
Battery settings
Input signals
Comm settings
User password enable
User password settings
Settings
On/Off settings
Forced Reboot
Auto Restart
Site wiring fault
Energy saving
Energy saving
Disabled √
200 W
400 W
600 W
1000 W
1500 W
2000 W
Select On/O Settings
Auto restart
Enabled √
Disabled
Site Wiring Fault
Disabled √
Enabled
(Shut off level)
[Enabled] [Disabled]
[Timer] [10s] … [180s]
When mains recover during
a shutdown sequence:
If set to Enabled, shutdown
sequence will complete and
wait 10 seconds prior to restart,
If set to Disabled, shutdown
sequence will not complete,
UPS stays on.
Default Value: [Enabled]
[Enabled] [Disabled]
[Enabled] [Disabled]
Prevents from starting
the UPS in case of phase
vs neutral wires swapping.
Default: Disabled
[Timer] [1min] … [15min]
[Level] [200W] … [2000W]
If Enabled, UPS will shut-down
back-up time, if load is less
than set value
Default: Disabled [200W]
[Shut o level] [Disabled]
after dened duration. of
Display Menu Screens