Eaton BiWire Flexi - Control and Indication Equipment (CIE) Details

EATON BiWire Flexi Installation Manual (PR215-216-520-03 15-03-16, PINSTFLEXIINST) March 2016 www.eaton.com 4
Important Instructions
1. Introduction
1.1 Purpose
This manual is intended as a guide for the installation and
commissioning of the BiWire Flexi 2/4/8 Zone Control panel.
Content within this guide is for general application and does
not specify the Fire Alarm System design and the guide
assumes the reader already has attained competency with
this type of system.
The installation of this system can only be carried out by
a competent person with relevant current training and
experience, with access to requisite tools, equipment and
information (as stipulated by BS5839).
The design has been carried out in accordance with a quality
management system, which incorporates a set of rules for
the design of all elements of the CIE and PSE.
The components of the CIE and PSE have been selected for
the intended purpose, and are expected to operate within
their specification when the environmental conditions
outside the cabinet of the CIE / PSE comply with class 3k5
of EN 60721-3-3:1995.
www.acornfiresecurity.com
www.acornfiresecurity.com