Eaton BladeUPS Series - System Components

Eaton BladeUPS DoS Installation Instructions P-164000613—Rev 3 1
Section 1 Introduction
If any equipment has been damaged during shipment, keep the shipping cartons and packing materials for the
carrier or place of purchase, and file a claim for shipping damage. If you discover damage after acceptance, file
a claim for concealed damage.
To file a claim for shipping damage or concealed damage: 1) File with the carrier within 15 days of receipt of
the equipment; 2) Send a copy of the damage claim within 15 days to your service representative.
System Components
The equipment components of the BladeUPS system are shipped as follows:
l
1 palletized BladeUPS Cabinet (see Figure 1)
l
1 palletized Transformer (not needed if you are using an existing transformer or not using a transformer; see
Figure 1)
Figure 1. BladeUPS Cabinet and Transformer (if ordered)
l
2 BladeUPS shipping cartons (see Figure 1 and Figure 2 for more information)