Installation
Eaton BladeUPS 12 kVA Maintenance Bypass Cabinet Installation and Operation Manual P-164000130—Rev 1 www.eaton.com/powerquality 3-3
2. Locate the vent covers at the bottom of the front and back door (see Figure 3-1). Using a nut driver,
remove the two 1 / 4–20 x 1 1/2-inch hex head screws that secure each vent cover.
3. Remove and retain the vent covers and screws for reinstallation.
Figure 3-1. Removing the Vent Cover on the Front Door
To Next Page
Loading...
