62
Mounting- and Operating Instruction CEAG DualGuard-S 40071860347 January 2020 www.ceag.de
23 BCM.1 Module
LED,s / Service Push-button Function
Service Pin: Pressed shortly
= Login BCM.1 module to ACU
= Status display on the color touch screen.
More than 8 s pressed
= Setting of the float charge voltage
ISO-Test + / ISO-Test - button: Simulation of an insulation fault
LED charging fault : The LED charging fault lights up red when a module of the
charging system (BCM, CM 1.7A or CM3,4 A) is faulty. A de-
tailed error message is displayed on the colour touch screen.
LED ISO Failure: The ISO fault LED lights up red if there is an insulation fault
in the battery circuit.
HMI
BCM.1ACU
Strang 1
Strang 2
Strang 3
Strang 4
To Next Page
Loading...
