12
3 Technical Data
Mounting and Operating Instructions CEAG Central Battery System ZB-S 40071860179 (L) November 2018 www.ceag.de
3.6 Data Sheet for ZB-S/18C6
Type of system: ��������������������������������������������ZB-S 18C6
Construction:
������������������������������������������������Sheet steel compact cabinet with divided
door
Height:
���������������������������������������������������������� 2050 mm
Width:
�����������������������������������������������������������800 mm
Depth:
����������������������������������������������������������� 600 mm
Weight without battery:
�������������������������������approx� 205 kg
Insulation class: �������������������������������������������I
Degree of protection:
�����������������������������������IP 20
External painting:
�����������������������������������������Structure powder laquer RAL 7035 light grey
Cable entry:
��������������������������������������������������at the top (prepunched flange plates)
Cabinet construction:
�����������������������������������two parts, screwed together, divisible
Hinge: ����������������������������������������������������������������right
Mains rated voltage: ������������������������������������ 4000V AC, 50/60 Hz
Battery rated voltage:
����������������������������������216V DC
Battery capacity (C10; 1�8 V/Z; +20°C): �������5�5-89�4 Ah
Type of battery: ��������������������������������������������Lead acid battery, 10 years service life at
+20°C acc� to IEC 486
Duration of emergency lighting: ������������������1 h, 1,5 h, 2 h, 3 h, 8 h
Recharging time: ������������������������������������������12 h acc� to DIN EN 50171
Ambient temperature operation: �����������������-5°C up to +35°C
Opt� ambient temperature battery: ��������������+20°C
(please attend to the attached operating and installation instructions)
Mains feed in (max� 16mm²): �����������������������Q1
Battery feed in (max� 16mm²): ����������������������Q2
Max� 40 circuits (max� 4mm²)*: ��������������������X1�1, X2�1, X3�1
Marshalling mains (max� 35mm²): ���������������X7, F10-F11
Marshalling battery (max� 35mm²): ��������������X9, F20-F21, F30-F31
Addresses optional places DLS-3Ph, TLS (max� 2�5mm²): customised
Connection to ext� control switch (max� 4mm²)**: X1�1�S1-S2
Connection to 24V current loop (max� 4mm²)**: X1�1�S3-S4
Connection to potential-free signal contacts
(max�4mm²)**: ����������������������������������������������X1�1 C0, 14, 12, 24, 22, 34, 32, C1, 44, 54
Connection to CG-S Bus (max� 4mm²)**: ����� X1�1�A-B
Connection to RS485 Bus (max� 4mm²)**: ���X1�1�RS485�A-B
Connection to 24V analog output (max� 4mm²)**: X1�1�+24V Out--24V Out
Connection to 24V analog input (max�4mm²)**: X1�1 Z11, Z12, Z21, Z22, Z31, Z32, Z41,
Z42
* Max� 2�5mm² flexible with wiring sleeve� The final circuits get wired customised�
** Two strands to max� 0�5 mm² with twin wire end sleeve can be clamped in a clamp
spring terminal�
Prepunched roof sheeting for:
26 x M16 x 1,5
114 x M20 x 1,5 / M25 x 1,5
28 x M32 x 1,5
8 x M32 x 1,5 / M40 x 1,5
Batterieanschlussspannung
Stahlblech Compactschrank mit geteilter Tuer
oben (vorgepraegtes Dachblech)
Strukturpulverlack RAL7035 lichtgrau
Blei Akku, 10 Jahre Gebrauchsdauer
Umgebungstemperatur Betrieb Elektronik
Optimale Umgebungstemperatur Batterie
(beachten Sie bitte die beiliegenden Bedienungs- und Wartungsanweisungen)
Stromkreisabgaenge (max. 4mm²)
Batterieeinspeis ung (max. 35mm²)
Netzeinspeisung (max. 35mm²)
Anschluss CGS BUS (max. 4mm²)
Anschluss potentialfreie Meldekontakte (max. 4mm²)
Anschluss 24V Stromschleife (max. 4mm²)
Anschluss RS485 BUS (max. 4mm²)
Anschluss Externer Steuerschalter (max. 4mm²)
Adressen Optionsplaetze DLS-3PH, TLS (max. 2,5mm²)
Anschluss 24V analog Ausgang (max. 4mm²)
Anschluss 24V analog Eingang (max. 4mm²)
Rangierung Batterie (max. 35mm²)
Rangierung Netz (max. 35mm²)
X1.1.12-14-11/22-24-21/32-34-31
X1.1.Z1.1-Z1.2/Z2.1-Z2.2/Z3.1-Z3.2/Z4.1-Z4.2
Ladestörung/Charge-Failure
CEAG Notlichtsysteme GmbH, Soest, Germany