Eaton CF2000 - Default Chapter; Table of Contents

2
Technical Data PR202-50-502-22
Effective June 2017
CF2000 System
EATON www.eaton.com
Contents
Introduction to the Manual ..................3
Notice
.................................3
System Installation and Design
...............4
Introduction
............................4
Project Planning
.........................5
System Design Guidelines
.................5
Compatible Equipment
...................6
Interfaces
............................. 12
Equipment Compatibility ................. 16
System Overview ........................ 17
Simple user interface .................... 17
User configuration and maintenance facilities . 17
Spur tolerant soft addressing .............. 17
Technical Specification ..................... 18
Optional Functions as per EN54 Parts 2 & 4 .. 20
Installation .............................. 21
Mains Supply .......................... 21
Cable Segregation ...................... 21
Panel Installation ....................... 21
Fixing details .......................... 22
System Wiring ......................... 23
Commissioning CF2000 ................... 24
Up/downloading using PC software ......... 24
Device input programming ................ 25
Device Outputs ........................ 26
Panel Outputs ......................... 27
Panel Fault Finding ...................... 28
Protocol Format ........................ 30
Panel Controls and Indicators ............... 31
Panel Overview ........................ 30
System Healthy ........................ 31
View Event ............................ 32
Fire Event ............................. 33
View Fires ............................ 34
View Pre-Alarm ........................ 35
View Fault ............................ 36
View Disabled Address .................. 37
View Disabled Zone ..................... 39
View Disabled I/O ...................... 40
View Log ............................. 41
Operations (Soft Reset) .................. 42
Operations (Evacuate) ................... 43
Operations (Silence Alarms) ............... 44
Operations (Lamp Test) .................. 45
Operations (Weekly Test) ................. 46
Access Level 2 .......................... 47
Commissioning ........................ 47
Panel Settings (Erase Log) ................ 48
Panel Settings (Change Password) ......... 49
Panel Settings (Change Language) ......... 50
Panel Settings (Date/Time) ................ 51
Panel Setting-s (System Details) ........... 52
Testing (Test Device) .................... 53
Testing (Test Zone) ...................... 54
Testing (Test Sound Levels) ............... 55
Testing (One Man Walk Test) .............. 56
Testing (Global Flashing LED) screen ........ 57
Testing (Analogue Levels) ................ 58
Device Config (Add Device) ............... 59
Device Config (Delete Device) ............. 60
Device Config (Configure zones) ........... 61
Appendix ............................... 62
System Wiring ......................... 62
Sounder Base Wiring .................... 63
Call Point ............................. 64
Base Sounder Wiring .................... 65
Loop Powered Beacon ................... 66
Internal Wall Sounder .................... 67
IP66 Wall Sounder ...................... 68
3 Way Input/Output Unit ................. 69
1 Way Input/Output Unit ................. 70
Zone Monitor Unit Wiring ................ 71
Intrinsically Safe Zone Monitor Unit ......... 72
Shop Monitor Unit ...................... 73
Spur Isolator ........................... 74
4 Way Sounder Controller ................ 75
Micro Zone Monitor Unit ................. 76
Micro Input Module ..................... 77
Battery Disposal Instructions .............. 78
CE Marking ........................... 79