22
Technical Data PR202-50-502-22
Effective June 2017
CF2000 System
EATON www.eaton.com
Fixing Details
Read all the installation instructions before commencing with the
installation. The installation of this panel must be carried out by a
suitably qualified /trained person.
The installation must comply with IEE wiring regulations and with
BS5839 part 1 2002
The electronic components within the fire panel are Static
Sensitive. Do not touch the electronics directly.
Mounting the Backbox
The CF2000 can be flush mount or surface mounted.
1. For Surface Mount; drill four holes and fix the backbox to
the wall.
2. For Flush Mount the backbox requires a hole 310mm x
355mm with a depth of 117mm.
Figure 2 shows the back box dimensions.
Figure 2. Back Box dimensions
Installing Cabling
Once the backbox is mounted the next stage is to install the
power and loop cables and fit the glands.
To Next Page
Loading...
