Eaton CF2000 - Installation; Mains Supply Connection; Cable Segregation; Panel Mounting

30
Technical Data PR202-50-502-22
Effective June 2017
CF2000 System
EATON www.eaton.com
Panel Controls and Indicators
Panel Overview
Panel Display
① LCD Display
② System LEDs
③ Zonal LEDs
④ Buttons
LED Display
LED Name Function Action
①
Power On Shows Panel is on (Mains Healthy) Check Indicator is Illuminated
②
Fire Indicator Panel has Detected a Fire Implement Fire Action Procedure
③
General Fault
Monitors devices for faults e.g. Smoke detectors/Sounders Report to System Supervisor
④
General Disable Monitors panel for disablements Report Fault to Service Dept
⑤
Test Supervisor/Engineer is testing the system Check with System Supervisor
⑥
Delay Active Part of the system has been disabled Check with System Supervisor
⑦
FRE On Fire Routing Equipment relay activated Report to System Supervisor
⑧
FPE Indicates Fire Protecting Equipment status Check with System Supervisor
⑨
Power Fault Indicates PSU fault Check with System Supervisor
⑩
Sounder Indicates the Sounder status Check with System Supervisor
⑪
FRE Indicates Fire Routing Equipment status Check with System Supervisor
⑫
System Fault Panel has a fault Report to System Supervisor
Figure 9. Panel Controls and Indicators