45
Technical Data PR202-50-502-22
Effective June 2017
CF2000 System
EATON www.eaton.com
Operations (Lamp Test)
The Lamp Test screen is accessed as shown below. The
Operations screens are accessed from the healthy screen by
first pressing any button. You will then be prompted to enter the
passcode which will show the events screen by default, press
the Scroll Down button until the Lamp Test screen is shown as
illustrated below.
Press OK and scroll through the list of options using the Up and
Down arrow buttons and pressing OK
to select.
Figure 24. Operations (Lamp Test) screen
To Next Page
Loading...
