Set Date/Time
Fig 14
The ‘Set Date/Time feature is a relatively simple and self-explanatory method of setting the date and
time.
However, if the panel is part of a multi-panel network, all of the clocks would need to be synchronised.
An extra button ‘Synch with master’ has been added to automatically synchronise the time with the
master panel, which in this case is always panel number 1.(Legacy Panels)
From Display Firmware version 3.03.51 the Sync with master button has been removed and this
function is automatic, the ‘master’ panel initiating a clock sync command every hour.
Configure Zones
Following an Autolearn all devices are by default placed into Zone 1, Extra zones can then be added
using the if the Site Installer is available then extra zones can be added and devices can be moved
into the correct zone. If minor changes are required, then this can also be carried out directly at the
panel using the configure zones menu.
To Next Page
Loading...
