Fig 40
Sounder 1 & Sounder 2
This menu allows the conventional sounder circuits to be set to continuous or pulsing, delayed or
double knock
Terminology
When the panel goes into Fire the word FIRE or ALARM can be selected to display this as part of the
indication on the screen.
Test Fires Activate fault relay.
This feature was provided so that when connected to a shopping mall the main operator needed to
know when a test was being carried out by individual shop units. During a weekly or walk test the fault
relay will change state to warn the centre that a test was in progress rather than a true fire.
To Next Page
Loading...
