85 Amended: Sept 21
Annex 1
Notes on CF2000
Introduced approximately 2007, the CF2000 was intended to be a low-cost Analogue panel for the
integrator/partner program.
The original version had the following features;
• 2 Loops of addressable items of the same protocol of the DF6000
• 4 Conventional sounder circuits
• Rubber button input controls
• Not touch screen
• Networkable using the same network card as the DF6000
The lack of touch screen limits the functionality of the panel which has only 2 menus, User and
Engineer, so screen-controlled functions are not included. These are;
1. Programming I/O and sounders, including;
a. Sounder settings
b. Aux Board FRE Impedance band
c. HMO mode
d. T1/T2 settings
e. AVF
f. FRE DN override
2. Configure Zones
3. Change Text
4. Add/Delete only used for devices and does not include zones.
5. Italian Mode setting
6. Any Network functionality (which was removed approx. 2012/2013)
7. The day/night facility allowing a timed alarm re-sound.
To Next Page
Loading...
