90 Amended: Sept 21
prior to programming the device. This is done by a right click on the device icon and choosing the
correct type of repeater device from the drop-down box.
The same download lead that is used to program the main panel is used for the repeater.
Fig A02
When ready to download right click the device again and choose ‘send repeater’
Fig A03
Menu Structure
The CF2000 is operated via an 8 button keypad. The default healthy screen is shown below. From
this screen all panels functions can be operated. Press the OK key to prompt the passcode.
For example, the “Commissioning” screen can be accessed from the healthy screen by first pressing
the OK button. The panel will then prompt you to enter the passcode which will show the
commissioning screen by default, press the “Scroll Down” button until the “Auto learn” screen is
shown as illustrated below. Press the “OK” and scroll through the list of options using the UP and
Down arrow buttons and press “OK” to select.
A first time Autolearn or backdoor Autolearn method is to power up the panel whilst holding down
button 4, this will erase the current CDR and initiate the Autolearn sequence.
To Next Page
Loading...
