92 Amended: Sept 21
Disable I/O - View Screen
Log – View Screen
Download
View Test – View Screen
c) Device Config
Enable / Disable – Disable Address – Loop – Select Device to Enable or Disable
Disable Zone - Select Zone to Enable or Disable
Disable I/O - Select I/O to Enable or Disable
Change Device – Loop – Enter Address - OK or Fail Screen
Check Autoconfig – OK or Fail Screen
Enable All - OK to Continue or Cancel to EXIT Screen
Panel Engineers Menu 2132
a) Commission
PC to Panel – Panel waits for the PC – Press OK to Finish - Panel Resets
Auto Learn – Panel Auto Learns Devices on the Loops – Panel Resets
Panel to PC – Panel waits for the PC – Press OK to Finish – Panel to PC screen
b) Panel Settings
Erase Log – OK to Continue or Cancel to EXIT Screen
Print Settings - Not Used
Change Password – Enter new Password – Verify Password
Reset Password – OK to Continue or Cancel to EXIT Screen – Password set to Default
Language - Select Language from Menu – New Language selected
Set Date / Time - Change Hours – Change Date
System Details – System Details Menu – Scroll Down to View Details
Australian Mode - Enable / Disable
To Next Page
Loading...
