93 Amended: Sept 21
c) Testing
Test Zone – Select the zone to be Tested – Test LED on – Cancel to EXIT
Test Sound Levels – Sounders turn ON and OFF - Cancel to EXIT and STOP sounders
One Man Walk Test – Select or Disable Screen – Cancel to EXIT
Global Flashing LED - Select or Disable Screen – Cancel to EXIT
Analogue Level - Loop - Select Device – Analogue Level Screen – Cancel to EXIT
Test Device - Loop - Select Device – Cancel to EXIT
d) Device Config
Add Device – Loop - Searching Screen – Device found or None found Screen
Delete Device – Loop – Select Device to Delete – OK to accept Screen – Cancel to EXIT
Other Information
Unlike other Panels in the Adressable range the CF2000 is stand alone and has NO NETWORK
support.
As it also does not have a 130170 (HiLevel Engineer) menu the following features are also not
available:
• T1/T2 (Acknowledge & Search Timers)
• HMO
• AVF
To Next Page
Loading...
