Eaton CF3000 - Delete Device

106 CF3000 INSTALLATION AND OPERATION MANUAL 25-14682-A July 2019 www.eaton.com
Panel controls & indicators
Delete device
1. Enter the Service Mode and Select Configure, select “Add/Delete” then
“Delete Device”
2. Select a Device to Delete
3. Confirm or Cancel Deletion
Service
FRE Off
Reset
Add Zone
Add Device
Delete Zone
Delete Device
Exit
001 Device 1, Zone 1
Loop: 1, Zone: 1, Type : Opto/thermal
Touch row to delete
002 Device 2, Zone 2
Loop: 1, Zone: 2, Type : Opto/thermal
003 Device 3, Zone 1
Loop: 1, Zone: 2, Type : Opto/thermal
004 Device 4, Zone 2
Loop: 1, Zone: 2, Type : Opto/thermal
005 Device 5, Zone 1
Loop: 1, Zone: 1, Type : Opto/thermal
Exit
Goto
Reset
Service
FRE Off
Delete Device 3?
Device 3
Loop 1, Address 3, Device Type Opto/thermal
Yes
No
Yes, but keep settings