Eaton Char-Lynn 2000 Series - Page 14

14
2000 Series Disc Valve Motors
2000 SerieS diSc valve geroler motor C-MOLO-TM010-E1 June 2018 www.eaton.com
Valve 113 1121466-000
Valve — Speed Sensor Valve
111201307-002
Balance Ring
1118915-000
Housing, Valve (G 1/2 (BSP) Ports — G 1/4 (BSP) Case Drain Port)
2O† Seal
34414559-006
12
1
Drive, Valve
11
8433-000
11
1
Plate, Valve
11
22134-000
117O† Seal, Face, Inner 119049-001
18O†
1Seal, Face, Outer 119135-002
16
2Spring, Compression 227383-000
Housing, Valve (7/8-14 Str. Thrd. O-ring Ports — 7/16-20 Case Drain Port)
1
19
11
11
Seal, Shaft
119057-009
4†
Seal, Exclusion
11
9121-001
3†
Housing, Valve (1 - 1/16-12 180 Apart — 7/16-20 Case Drain Port)
111
11
10
1
Geroler
®
11
*
9 Drive, Main
111
*
21564-007
21564-001
21564-002
14
Housing, Valve (7/8-14 Str. Thrd. O-ring Ports — 7/16-20 Case Drain Port) — Shuttle Valve Housing
11121564-010
Housing, Valve (1 - 1/16-12 180 Apart — 7/16-20 Case Drain Port) — Speed Sensor Housing
121564-016
Housing, Valve (7/8-14 Str. Thrd. O-ring Ports — 7/16-20 Case Drain Port) — Speed Sensor Housing
121564-012
111
Housing, Valve (G 1/2 (BSP) Ports — G 1/4 (BSP) Case Drain Port) — Speed Sensor Housing21564-015 111
Item
No.
Description
Brgl.
Whl.Std.
Quantity per Unit
Part
Number
Shaft and Bearing Kit (1-1/4 in. Splined 14T)
11
21618-004
Shaft and Bearing Kit (1-1/4 in. Tapered)
11
21618-003
Shaft and Bearing Kit (1-1/4 in. Tapered — Special shaft for Seal Guard 121618-032
Nut, Hex (1-1/4 in. Tapered Shaft)
11
14163-000
Key (for 1-1/4 in. Tapered Shaft)
11
14392-006
1
Shaft and Bearing Kit (7/8 Splined 13T)
1
21618-007
1 Shaft and Bearing Kit (1 inch Straight) 1121618-001
Key (for 1 Straight Shaft) 11
14193-000
Shaft and Bearing Kit (1-1/4 inch Straight) 1121618-002
Key (for 1-1/4 Straight Shaft) 11
14392-008
Shaft and Bearing Kit (1 in. 6B Splined)
11
21618-005
11
1
Shaft and Bearing Kit (25 mm Straight)
1
21618-026
Key (for 25 mm Straight Shaft)14462-006
11
1
Shaft and Bearing Kit (32 mm Straight)
1
21618-023
Key (for 32 mm Straight Shaft)14460-005
Pin, Balance Ring 22214351-00015
Housing, Valve (Manifold Mount — 7/16-20 Case Drain Port) 11121564-004
Housing, Valve (Manifold Mount — G 1/4 (BSP) Case Drain Port)
11121564-008
5† Ring, Back-up
1117382-000
Housing, Bearing, Wheel Mount (Four Bolt) 1
1
21578-003
Housing, Bearing, Wheel Mount (Four Bolt) — Compatible for HAYES Brake
121578-015
Housing, Bearing, SAE A (Two Bolt)
121578-004
6
Housing, Bearing, SAE B (Two Bolt)
121578-001
Housing, Bearing, Diagonal (Four Bolt)
121578-005
Housing, Bearing, Magneto (Four Bolt)
121578-008
Housing, Bearing, Wheel Mount (Four Bolt) — with Seal Guard Groove
21578-016
Seal, Shaft Face 11
9050-000
7†
Plate, Wear
11
22102-000
8
Continued on Page 16
Housing, Valve (7/8-14 Str. Thrd. O-ring End Ports — 7/16-20 Case Drain Port) 11121564-006