Eaton Cutler-Hammer Digitrip RMS 510 - Typical Control Schematic Without CC1 CC2 Modification; CC1 CC2 Modification; CC1 CC2 Modification to Typical Control Schematic (Stored Energy); CC1; CC2 Modification to a Typical Control Schematic (Solenoid)

AD 33-855-4
Page 59
LS:LS
Fig. 10-9
Typical Control Schematic
Without
CC1 / CC2
Modification
Cell terminal block assy.
Note: l\,4ounl
"BF"
relay
or
equivalent, in cell near
cell terminal block assy.
Fig. 10-11 CC1 / CC2
Modification to a Typical
Control
Schematic
(Stored
Energy)
Fig. 10-10
Typical Control Schematic
Without
CC1 / CC2
Modification
Fig-
10-12 CC1 / CC2 Modification
to a Typical
Control Schematic
(Solenoid)
Cell terminal block
assy.
Nole:
Mount "BF'relay or
equivalent,
in cell near
cell termanal block
assy.
Etfective 9/01
ElT.il