Eaton Cutler-Hammer Digitrip RMS 510 - Warranty Disclaimer and Liability

Page 6
AD 33-855-4
1.2
Introduction
This Application
Data
is
provided
as a
guide,
for
authorized
and
qualified personnel
only,
in the
selection and
application
of Digitrip
RMS Retrofit
Kits
on Power Circuit
Breakers.
The
information,
recommendations,
descriptions,
and
safety notations
in this
document are
based
on Cutler-Hammer's
experience and
judgement
with respect
to retrofitting
Power Circuit
Breakers.
All
possible
contingencies
which
may arise during
installation, operation,
or
maintenance,
and all
details
and variations
of this equipment
do
not
purport
to be
covered by
this document.
lf further
information
is desired
by the
purchaser
regarding a
particular
installation,
operation,
or maintenance
of
his
particular
equipment,
contact
your
local
Cutler-
Hammer representative
or
phone
1-800-937-5487.
1.3 Warranty
Disclaimer and
Liability
Limitation
The instructions
for installation,
testing,
maintenance,
or
repair herein are
provided
for the
use of the
product
in
general
commercial
applications
and
may not be appropriate
for use
in
nuclear applications.
Additional instructions
may
be available
upon
specific
request to replace,
amend, or supplement
these instructions
to
qualify
them
for use with
the
product
in safety
related
applications
in a nuclear
facility.
The information,
recommendations,
descriptions,
and safety
notations
in this document
are based
on Cutler-Hammer's
experience
and
judgement
with respect
to
retrofitting of Power Circuit
Breakers. This
information should
not be
considered
to be all
inclusive or covering
all
contingencies.
lf furlher information
is required,
Cutler-Hammer
should
be consulted.
NO WARRANTIES,
EXPRESSED
OR IMPLIED,
INCLUDING
WARRANTIES
OF FITNESS
FOR A
PARTICULAR
PURPOSE
OR
MERCHANTABILIry
OR
WARRANTIES
ARISING
FROM COURSE
OF DEALING
OR
USAGE
OF
TRADE, ARE
MADE REGARDING
THE
INFORMATION,
RECOMMENDATIONS,
AND DESCRIPTIONS
CONTAINED
HEREIN. ln
no
event
will Cutler-Hammer
be
responsible
to the
user in contract,
in tort
(including
negligence),
strict
liability or otherwise,
for any special,
indirect,
incidental, or
consequential
damage or
loss
whatsoever,
including but not
limited to damage
to
or loss
of use of equipment,
plant
or
power
system,
cost of
capital,
loss of
profits
or
revenues,
cost of
replacement
power,
additional
expenses
in
the use of existing
power
facilities, or claims
against
the user by its customers
resulting from
the use of the
information,
recommendations,
and
descriptions
contained
herein.
E:T.il
Etfective 9/01