IL17569
Page 8-14
Effective June, 2001
• All power measurements (W, var, VA).
• All power demand measurements (W, var, VA).
• All power factor measurements (Dsp PF, App PF).
• The voltage frequency.
• All contact inputs (Cin1 – Cin8).
• All logic block outputs (LB1 – LB6).
• All timer block outputs (TB1 – TB6).
If the data logger is programmed to 1-Pass then a trigger will not be
recognized until the data logger is reset. The data logger can have
its data reset in one of the following ways:
• Front Panel Reset – Press the reset button until the “Reset Main”
menu is displayed, select “Datalog Trigger” and press enter, press
enter again.
• Communication – A reset is performed through an external
communication command being given.
To Next Page
Loading...
