Eaton Cutler-Hammer FP-5000 - Page 65

Page 5-17
IL17569
Effective June, 2001
Table 5.5 Contact Input Configuration Settings Phase time overcurrent (51P) and instantaneous (50P-1 & 50P-2)
device settings
Display Setting Description Setpoint Range/ Default Selected Refer to
Value Selection Setting Value Sec. #
Contact input Contact Input 5.5.5
CFG Configuration Settings 9.1
Cin1: Select Cin1 configuration user defined, 52a, 52b, 52a
BFI, Bkr Trouble,
Cin2: Select Cin2 configuration Remote Open, 52b
Remote Close,
Cin3: Select Cin3 configuration Remote Reset, BFI
DatalogTrigger,
Cin4: Select Cin4 configuration Demand Sync, Bkr Trouble
Select Set 1,
Cin5: Select Cin5 configuration Select Set 2 Remote
Open
Cin6: Select Cin6 configuration Remote
Close
Cin7: Select Cin7 configuration Remote
Reset
Cin8: Select Cin8 configuration user
defined