Eaton Cutler-Hammer FP-5000 - Page 69

Page 5-21
IL17569
Effective June, 2001
Table 5.6 Output Configuration Settings (continued)
Display Setting Description Setpoint Range/ Default Selected Refer to
Value Selection Setting Value Sec. #
Trip Indicator Output Trip Indicator Settings 5.5.6
9.2
Dropout: Select trip indicator dropout Latched or Unlatched Latched 9.6
Trip1: Enable or disable Trip1 indicator Disable or Enable Enable
Trip2: Enable or disable Trip2 indicator Disable or Enable Enable
Rly3: Enable or disable Rly3 indicator Disable or Enable Disabled
Rly4: Enable or disable Rly4 indicator Disable or Enable Disabled
Rly5: Enable or disable Rly5 indicator Disable or Enable Disabled
Alarm: Enable or disable Alarm indicator Disable or Enable Disabled
Healthy: Enable or disable relay Disable or Enable Disabled
Healthy indicator
Alarm Indicator Output Alarm Indicator Settings 5.5.6
9.2
Dropout: Select trip indicator dropout Latched or Unlatched Latched 9.6
Trip1: Enable or disable Trip1 indicator Disable or Enable Disable
Trip2: Enable or disable Trip2 indicator Disable or Enable Disable
Rly3: Enable or disable Rly3 indicator Disable or Enable Disabled
Rly4: Enable or disable Rly4 indicator Disable or Enable Disabled
Rly5: Enable or disable Rly5 indicator Disable or Enable Disabled
Alarm: Enable or disable Alarm indicator Disable or Enable Enable
Healthy: Enable or disable relay Disable or Enable Enable
Healthy indicator
Pickup Indicator Output Pickup Indicator Settings 5.5.6
9.2
Dropout: Select pickup indicator dropout Latched or Unlatched Unlatched 9.6
IOC: Enable or disable IOC Disable or Enable Enable
pickup indicator
TOC: Enable or disable TOC Disable or Enable Enable
pickup indicator
Volt: Enable or disable voltage Disable or Enable Enable
pickup indicator
OverFreq: Enable or disable overfrequency Disable or Enable Enable
pickup indicator
UnderFreq: Enable or disable underfrequency Disable or Enable Enable
pickup indicator
Unbalance: Enable or disable voltage/current Disable or Enable Enable
unbalance pickup indicator
Prot Alarm: Enable or disable protection Disable or Enable Disabled
pickup indicator