Eaton DF6100 - Faults; Enable;Disable (Others Menu)

40 INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Section 3: Panel controls & indicators
Faults
Enter Supervisor Mode Passcode and select “Faults” tab.
Enable/disable (others menu)
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and
enter the passcode.
Enter the Supervisor Mode passcode and select the “Others” tab.
Supervisor
FRE Off
Evacuate
Silence
Alarms
Mute
Buzzer
Reset
Fires
AC = 0
View Pre
Alarms
View
Disabled
View
Faults
Others
Faults = Short circuits, broken detectors etc.
To remove faults from this list:
1) Fix Fault
2) Rest Panel
Supervisor
FRE Off
Evacuate
Silence
Alarms
Mute
Buzzer
Reset
Fires
AC = 0
View Pre
Alarms
View
Disabled
View
Faults
Others
Weekly Test
Send Log to PC
Enable/Disable
View Log
Print
Check Config
Lamp test
Send analogue values to PC