Eaton DF6100 - Replace Device

49INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Section 3: Panel controls & indicators
Replace device
Replace device enables an existing device to be replaced with a new device without
losing the existing text and sounderprogramming.
Replace a single device then use the replace device menu to allocate an existing
address to the new device.
1100 22 33
44 55 66
77 88 99
Supervisor
FRE Off
Fires
AC = 0
Evacuate
View Pre
Alarms
Enable/Disable
Print
Lamp test
Supervisor
FRE Off
Supervisor
FRE Off
Supervisor
FRE Off
Enter Loop 1 Address
Del
Ok
Check Auto Config
Replace Device
Exit
Exit
Select a Loop
Loop 1
Loop 2
Exit
Weekly Test
Send Log to PC
Check Config.
Send analogue values to PC
View Log
Silence
Alarms
View
Disabled
View
Faults
Others
Mute
Buzzer
Reset