Eaton DF6100 - Programming I;O and Sounders T1

66 INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Section 3: Panel controls & indicators
Programming I/O and sounders T1
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
Enter the Service Mode and Select Configure.
T1
160 secs
Exit
100 secs
40 secs
150 secs
90 secs
30 secs
180 secs
120 secs
60 secs
170 secs
110 secs
50 secs
140 secs
80 secs
20 secs
130 secs
70 secs
10 secs
Off
Service
FRE Off
Mute
Buzzer
Reset
Configure
Enable / Disable Address
Commission
Test
Mute
Buzzer
Reset
Service
FRE off
Exit
Day/Night
Network Protocal
Programming I/O
and Sounders
Change Date/Time
Change Text
Configure Zones
Add/Delete
Network
Configure Heat Detectors
Language
Change Pascode
Reset
Service
FRE off
Exit
Auxillary Board
HMO
Alarm Verification Feature
FRE double-knock override
Sounder tone
Panel Outputs
T1 / T2
Reset
Service
FRE off
Exit
T2
T1/T2 Callpoint Overide
T1/T2 ack.
T1/T2 scope
Auto -enable Delays
T1
Auto-disable delays
Select “Programming
I/O and Sounders”
from the Configure
Menu Screen.
Then press T1