68 INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Section 3: Panel controls & indicators
Select “Programming
I/O and Sounders”
from the Configure
Menu Screen.
Press panel outputs -
NOTE Interface Inputs/
Interface Outputs are
only used in certain
export markets.
Programming I/O and sounders. Panel outputs
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
Enter the Service Mode and Select Configure.
Mute
Buzzer
Reset
Service
FRE Off
Exit
Mute
Buzzer
Reset
Service
FRE Off
Exit
Service
FRE Off
Mute
Buzzer
Reset
Enable / Disable Address
Commission
Test
Configure
Change User Code
Change Date/Time
Change Text
Configure Zones
Add/Delete
Network
Configure Heat Detectors
Language
T1
Auxiliary Board
T2
Alarm Verification Features
Day/Night
Programming I/O and Sounders
Panel Outputs
To Next Page
Loading...
