Eaton DF6100 - Programming I;O and Sounders. Auxiliary Board

69INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Section 3: Panel controls & indicators
Programming I/O and sounders. Auxiliary board
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
Enter the Service Mode and Select Configure.
Configure
Mute
Buzzer
Exit
Add/Delete
Change Date/Time
Change Text
Configure Zones
Change Pascode
Network Protocal
Extinguisher
Fire Bridgsde
Australian
Swedish Mode
Day/Night
Language
Network
Configure Heat Detectors
Mute
Buzzer
Reset
Exit
Panel Outputs
T1/T2
Alarm Verification Feature
HMO
FRE double-knock override
Sounder tone
Reset
Reset
Test
Enable/Disable Address
Service
FRE Off
Service
FRE off
Not Required
Service
FRE off
Auxillary Board
Programming I/O
and Sounders
Commission
Select “Programming
I/O and Sounders”
from the Configure
Menu Screen. Then
press Auxiliary Board